Yin-Yang tree from beads: how to weave a wonderful home decoration with photos and videos


The most popular ancient Chinese symbol on the planet is the Yin-Yang symbol. According to the philosophy of Taoism, it means the unity of opposites: black and white, sun and moon, good and evil, men and women, who cannot exist without each other and together make up the world. The master class “Do-it-yourself Yin-Yang tree made of beads” is very clear, but at the same time simple, even a beginner can cope with the tasks.

This tree can be a wonderful gift for parents on a wedding anniversary, newlyweds, or just a loved one. The finished product will be a wonderful addition to the interior of your home or office. You will learn how to make such a miracle from our material.

What is the Yin-Yang tree made of:

  • black beads - 150 g;
  • white beads - 150 g;
  • bead wire - 3 coils;
  • thick aluminum wire - 1 meter;
  • stand mold;
  • black and white floss threads - 20 grams each;
  • PVA glue;
  • paints in white and black shades;
  • gypsum;
  • tassels.

How to weave twigs

In this part of the article you can learn how to weave branches for a future tree. First you need to prepare spools of beads.

To make the tree look more realistic and the branches appear airy, it is better to use thin wire of a neutral shade.

Next, step back from the edge about 15 centimeters. Weave several loops that consist of 8 beads. There should be 15-17 loops in total.

Make a similar indent from the outer loop and carefully cut the wire. When you finish working on the loops, you can begin assembling the blank for Yin-Yang. The photo shows that you need to start from the central element. Twist the wire, and after the last two loops, scroll it about 3-4 cm.

Related article: DIY baby sling beads for beginners: master class with video

To make the tree look more neat, you need to straighten the branches. Next you need to make 70 white and 100 black blanks.

Symbol meaning

In accordance with the ideas of Chinese philosophers, this symbol identifies dualism, dividing into light and dark halves. A perfect circle with two halves inside symbolizes infinity. Literally, “Yin-Yang” means “the dark and light side of the mountain.”

Yin and Yang indicate opposites, which are parts of the whole, and harmony and world balance will depend on the unity of the halves.

A black and white beaded tree can bring joy and peace to your home, but even if you don’t pay attention to the deep meaning, this craft will become a wonderful accessory that complements the interior, and when you look at it you will experience positivity and pride in skillful hands.

After looking at the beaded trees in the photo, made in the Yin-Yang style, you will definitely want to create such a craft yourself.

Making flowers and leaves

If you want the Yin-Yang tree to be more lush and elegant, weaving flowers will make it bloom. First you need to make a black flower. To do this, you need to place eight white beads on the wire and twist the loop two or three turns at the base.

Take 16 black beads, circle them around the white loop and twist at the base. Then again collect eight white beads and twist 2 turns. Circle black beads (15-16 pieces) around the white loop.

Make three more petals in the same way, then connect all the elements and place a bead in the center. Wrap the wire with floral tape. You need to take 7 beads onto the wire and make loops. Next, make several pieces, attach to the flower and secure with floral tape. Also make leaves for the white flower.

In the classic version, black branches cover white branches. Both Yin-Yang branches are arranged in the shape of a heart. How to turn blanks into finished products? First, make blanks for the black branches. Then cut a piece of wire no more than 20 centimeters long and 1.2 millimeters in diameter. Wrap the black blanks using black thread (the white branches are attached to the trunk frame).

Useful tips

It can be difficult for beginner needlewomen to practice beadwork without useful recommendations. Some tips will help you quickly decide on the choice of materials and tools:


  • for products it is better to take opaque beads in matte shades;

  • transparent beads will look more impressive on colored wire;
  • gypsum can be replaced with putty or alabaster;
  • ashtrays, flower pots or cups without handles can serve as containers for the finished product;
  • if the trunk is covered with spray paint or acrylic, it is better to cover the branches with foil or cellophane at the time of painting.

Beaded items with the yin-yang symbol not only look interesting, but also carry a certain energy. The Chinese sign will help you achieve harmony and peace of mind. It is better to place trees and flowers on the table in the workroom or decorate the bedroom or living room with them.

Assembly and landing of the barrel

In order to assemble a tree, you must perform the following steps: take two pieces of wire 45-50 cm long, with a diameter of no more than 3.5 mm. Then form a frame of branches, at the end of which make a small loop. Use a very strong thread to fasten the branch to the frame.

Start screwing from the top of the head, placing the branches in a “spiral” relationship to the tree trunk. To prevent the wood from deforming, strengthen the frame with a piece of wire.

Attach the trunk of the tree using a loop to a pre-prepared form. Then prepare a gypsum mixture with a creamy consistency. Dry thoroughly and remove the mold.

Related article: Jewelry and decorations for a blue evening dress

Manufacturing process

The Yin-Yang tree made of beads is created using the parallel beading technique. To make such a craft yourself, use the step-by-step master class.

Twigs

How to make branches for a Yin-Yang tree from beads? It is necessary to thread eight beads onto the wire, twist them into a loop, retreating approximately 15 cm from the end. We form 16 loops side by side in the same way.

Step back the same amount, cut the wire using wire cutters.

When the loops are fully formed, you can start assembling all the elements for the tree from Yin and Yang beads. The wire needs to be twisted in the middle, then twisted a few centimeters after the two loops at the end. The stages of creating a craft in the Yin-Yang style from beads are well illustrated in step-by-step photos.

It is necessary to form 70 white elements and 95 black elements. Each branch should be straightened so that the tree looks aesthetically pleasing.

Leaves and flowers

A Chinese-style tree will look especially beautiful with flowers.

Making flowers with leaves:

  1. First you need to form the petals by stringing eight snow-white beads onto a wire, then fold a loop at the end, twisting the wire several times.
  2. Add 16 more black beads, circling them with white loops and twisting them at the base.
  3. Cast on 8 more white beads by twisting the loop two turns.
  4. Loop the 17 black beads around the white loop again. Form three more petals, combine the blanks together, placing a bead in the middle. Wrap floral tape.

For the leaves you need to use seven beads and form loops. Form two to four similar elements, tape them to the flower, securing them with floral tape. For a snow-white flower, the leaves are woven in the same pattern.

Collecting twigs

In this version of making a Yin-Yang tree, branches made of black beads are covered with white branches, which are placed in the shape of a heart.

To properly secure the branches, you should form a number of branches from black beads. Next, you should take a piece of wire with a diameter of 1.2 mm and a length of 15-20 cm. The blanks must be wound with strong black thread, branches of white beads will be attached to the trunk itself.

Assembling and twisting the barrel

Prepare two pieces of thick wire (diameter - 3.5 mm) 55 cm long. Make a frame of branches, form a small loop at the base.

Attach the branch with a strong thread, starting from the apical part. The branches should be placed spirally in relation to the trunk.

To ensure that the craft stands securely and does not deform, strengthen the frame using another piece of wire. The barrel should be secured using a loop in the selected mold.

Preparation of gypsum-adhesive mixture

To create the texture, a solution based on gypsum, water and PVA glue is used; the consistency should be similar to thick sour cream. All branches and the trunk itself should be coated with this solution. Use a knife or other sharp object to texture the bark until the mixture has completely set.

To secure the decorative elements you need to make three or four holes.

Planting a bead tree

For this, a mixture of gypsum and water is used; the tree placed in the stand should be filled with the solution, without adding about 1 cm to the edge. Wait for it to dry completely (it’s better to leave the craft overnight).

Painting

Use gouache or acrylic paints. The upper branches should be painted with black paint in several layers until the intersection of the side trunks; the trunk and lower branches should be painted with white paint. Wait for it to dry.

Using a dry, stiff brush, paint the bottom of the trunk and roots with black paint, making horizontal strokes. Also paint the bottom of the base.

The resulting beaded tree can be decorated at your discretion, using your imagination.

Photo source: https://vnitkah.ru/derevya-biserom/in-yan-bisera-derevo.php

Final stages

Prepare a mixture of PVA glue, plaster and water. Carefully coat each branch and the bottom of the trunk. Then you need to give the trunk texture. To do this, you need to cut through the bark on the hardening gypsum-adhesive mixture. Allow the product to harden. Make several holes to place the decor using an awl.

Now you can start painting. You need to take a brush and paint the top branch black with gouache up to the place where the branches intersect. Paint the lower branch and trunk white, then dry everything. Using a hard, dry brush, paint the bottom of the trunk, roots and stand with black paint. Leave everything to dry. The Yin-Yang tree made of beads is ready!

Necessary equipment

  • beads (black, opaque) - 150 grams.
  • beads (white, opaque) - 150 grams.
  • wire (beaded) - three coils.
  • wire for the frame (copper or aluminum) - 1 meter.
  • mold for stand.
  • black floss threads.
  • white floss threads.
  • large white beads. - 20 grams.
  • large black beads. - 20 grams.
  • PVA glue.
  • paints in white and black shades.
  • gypsum.
  • tassels.

We weave a Yin-Yang tree from beads with our own hands

What we need:

  • thin wire for beads (3 coils);
  • thick wire (1 m);
  • beads (black 150g and white 120g);
  • large beads of two colors (20 g each);
  • threads: wool or floss, black and white colors;
  • acrylic paints;
  • brushes;
  • PVA glue;
  • gypsum;

Our symbolic tree should consist of small branches, which will then be combined into larger branches.

Making thin branches

To weave the Yin-Yang tree with beads, let's start making branches of black and white flowers. To do this, stepping back a little from the edge, string 8 beads onto a thin wire and twist it into a leaf.

We need to make an odd number of such leaves, the distance of the twisted wire between them should be 1-2 cm.

We form a branch, starting from the central leaf.

When all our leaves are connected, we need to twist the wire down, about 3 cm. In order for the crown to be lush, you need to make about 65-70 of these white branches and 100 black ones.

Forming a large branch

When our supply of thin branches is ready, we can combine them into one large branch. For this we need a thick wire; it will take on the role of a frame. Let's cut pieces of thick wire to the length we need and begin to tightly wrap thin branches to it using floss threads of the desired color. To make one large branch you will need about 5 small ones.

Making the main frame

When our thick branches are ready, we will start making the frame. To do this, take a thick wire and bend it in a semicircle, form the first loop from one end, and bend the second end into a second, larger loop. If we did everything correctly, we will have a frame for our tree that resembles a heart shape.

If the wire we took is not elastic enough, you can use other available materials, for example, wooden or bamboo sticks, to strengthen the tree trunk.

We attach the branches to the frame.

The branches of the Yin-Yang tree will be attached according to the beading pattern described above (using threads).

Working on the plaster base

We will make the base of the tree from plaster or alabaster. To do this, we will dilute it to the proportion of sour cream and pour it into the mold. The gypsum hardens very quickly, so before it hardens, we will make holes into which we will then insert wire with beads imitating “grass”, complementing the Yin-Yang style.

Processing the trunk

The tree trunk can also be treated with plaster to give it the texture of wood. To do this, you need to pour a plaster mixture over it, and use a pointed tool to depict “bark.”

We paint the barrel and add details.

We will paint the barrel black. If you want, you can decorate the base with large black and white beads. So you have learned how to weave a Yin-Yang tree.

Bead weaving is a very exciting activity, and after learning how to make Yin-Yang trees, you can also prepare a good gift for a loved one. In order to better understand what other variations are possible, look at various photos with different tree options.

A tree of love is made in a similar way; it will look good combined with the Yin-Yang tree.

The tree of love is a stylish composition that looks like a heart. This thing will definitely become a symbol that will speak about your feelings without words. Absolutely anyone can make such a tree, first of all, because the work does not require a large number of tools. The most important thing is your desire and creative spark.

We take a wire that is thick enough. After all, it is with the help of this wire that we will shape the trunk. It is better to make such a heart-shaped tree from two different parts. One end of each wire needs to be twisted into the trunk, and the other parts should be shaped like a heart.

We make thin branches for our tree. At this stage of work, we will need beads and wire. The color of the beads will depend only on your choice. If you are planning to make a heart, then pink and light blue shades will suit you. The wire from which the branches will be woven must be chosen flexible and thin.

Cut a small piece of wire, about 25-30 cm, and put about 5 beads on it. We twist the wire so that we get the shape of a leaf. When we get the first leaf in the shape of a loop, you can move on to the next leaves. We recommend that you make 8-9 leaves on one branch.

Once you have the required number of leaves, start forming a branch. To do this, simply intertwine the two halves of your wire with each other. To make a tree you need to prepare 20-25 branches of each color. You will connect three thin branches into medium ones. The middle ones are three thick, and then assemble the trunk from the thick ones.

Secure the resulting two parts of the barrel to our ready-made base made of thicker and stronger wire. After you attach the beaded trunks to the base, it is advisable to wrap them on top with floss threads of a suitable color.

Now you need to take the container in which you will fix your tree and secure it there. For fixing, gypsum mortar is usually used. If desired, trunks can also be primed with this solution. After complete drying, they can be painted.

In order to consolidate the knowledge gained, we advise you to watch several videos on how to make a love tree from beads.

We hope that the love tree will become one of your favorite crafts in your assortment thanks to the simple instructions outlined in this master class.

Added by: Diveeva Go back Leave a comment

Content

The most popular ancient Chinese symbol on the planet is the Yin-Yang symbol. According to the philosophy of Taoism, it means the unity of opposites: black and white, sun and moon, good and evil, men and women, who cannot exist without each other and together make up the world. The master class “Do-it-yourself Yin-Yang tree made of beads” is very clear, but at the same time simple, even a beginner can cope with the tasks.

This tree can be a wonderful gift for parents on a wedding anniversary, newlyweds, or just a loved one. The finished product will be a wonderful addition to the interior of your home or office. You will learn how to make such a miracle from our material.

What is the Yin-Yang tree made of:

  • black beads - 150 g;
  • white beads - 150 g;
  • bead wire - 3 coils;
  • thick aluminum wire - 1 meter;
  • stand mold;
  • black and white floss threads - 20 grams each;
  • PVA glue;
  • paints in white and black shades;
  • gypsum;
  • tassels.
Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]